Tag Archives: ccna1
CCNA 1 Cisco Exploration quiz test chapter 5 correct answers

Chapter 5 Correct Answers:
1. How large are IPv4 addresses?
• 8 bits
• 16 bits
• 32 bits
• 64 bits
• 128 bits
2. Refer to the graphic. A user at the workstation cannot connect to the server. All cables have been tested and are working and all devices have IP addressing. However, the user cannot ping the server. What is causing the problem?
• The router interface does not have a default gateway.
• The switch does not have an IP address and default gateway.
• The workstation and server are on different logical networks.
• The workstation does not know the MAC address of the switch.
3. Which part of an IP address identifies a specific device on a network?
• first two octets
• third and fourth octets
• network portion
• host portio
•only the fourth octet
CCNA 1 Cisco Exploration quiz test Chapter 6 Correct Answers:

CCNA 1 Cisco Exploration quiz test Chapter 6 Correct Answers:
1. Given the IP address and subnet mask of 172.16.134.64 255.255.255.224, which of the following would describe this address?
• This is a useable host address.
• This is a broadcast address.
• This is a network address.
• This is not a valid address.
2.What is the network address of the host 172.25.67.99 /23 in binary?
• 10101100.00011001.01000011.00000000.
• 10101100.00011001.01000011.11111111
• 10101100.00011001.01000010.00000000
• 10101100.00011001.01000010.01100011.
CCNA 1 Exploration cisco Quiz Test correct answers CHAPTER 4 domande e risposte corrette del capito 4

Chapter 4 Correct Answers:
CCNA 1 Exploration cisco Quiz Test correct answers CHAPTER 3 domande e risposte corrette del capito 3

Chapter 3 Correct Answers CCNA 1 :
What are two forms of application layer software? (Choose two.)
applications (OK)
dialogsrequests
services (OK)
syntax
temporarily holds resolved entries
CCNA 1 Exploration cisco Quiz Test correct answers CHAPTER 2 domande e risposte corrette del capito 2

CHAPTER 2 CORRECT ANSWERS:
DOMANDE E RISPOSTE ESAME CAPITO 2 CISCO CCNA1
1. What are the key functions of encapsulation? (Choose three.)
allows modification of the original data before transmission
identifies pieces of data as part of the same communication (OK)
enables consistent network paths for communication
ensures that data pieces can be directed to the correct receiving end device (OK)
enables the reassembly of complete messages (OK)
tracks delay between end devices